 |
|
High Performance Drives Options and Accessories for Mentor II & Quantum III DC Drives
| Part # | Description |
| CBMCS-xxx | Motor Brake Cable to be connected to bulkhead connector on one end and motor connector on the other end, Custom Length - 1 ft increments (PTB-8-3 to NT, MG, MH) |
| CBMF-005 | Motor Brake Flex Duty Cable for 3" & 4" & 6" motors, Connector on drive end, Flying leads on motor end, IP65, 5 ft Length (BRM-1 to Epsilon, EN, MDS) |
| CBMF-015 | Motor Brake Flex Duty Cable for 3" & 4" & 6" motors, Connector on drive end, Flying leads on motor end, IP65, 15 ft Length (BRM-1 to Epsilon, EN, MDS) |
| CBMF-025 | Motor Brake Flex Duty Cable for 3" & 4" & 6" motors, Connector on drive end, Flying leads on motor end, IP65, 25 ft Length (BRM-1 to Epsilon, EN, MDS) |
| CBMF-050 | Motor Brake Flex Duty Cable for 3" & 4" & 6" motors, Connector on drive end, Flying leads on motor end, IP65, 50 ft Length (BRM-1 to Epsilon, EN, MDS) |
| CBMF-075 | Motor Brake Flex Duty Cable for 3" & 4" & 6" motors, Connector on drive end, Flying leads on motor end, IP65, 75 ft Length (BRM-1 to Epsilon, EN, MDS) |
| CBMF-100 | Motor Brake Flex Duty Cable for 3" & 4" & 6" motors, Connector on drive end, Flying leads on motor end, IP65, 100 ft Length (BRM-1 to Epsilon, EN, MDS) |
| CBMF-xxx | Motor Brake Flex Duty Cable for 3" & 4" & 6" motors, Connector on drive end, Flying leads on motor end, IP65, Custom Length - 1 ft increments (BRM-1 to Epsilon, EN, MDS) |
| CBMS-005 | Motor Brake Cable, Molded connector at motor end only, 5 ft Length (BRM-1 to NT, MG, MH) |
| CBMS-015 | Motor Brake Cable, Molded connector at motor end only, 15 ft Length (BRM-1 to NT, MG, MH) |
| CBMS-025 | Motor Brake Cable, Molded connector at motor end only, 25 ft Length (BRM-1 to NT, MG, MH) |
| CBMS-050 | Motor Brake Cable, Molded connector at motor end only, 50 ft Length (BRM-1 to NT, MG, MH) |
| CBMS-100 | Motor Brake Cable, Molded connector at motor end only, 100 ft Length (BRM-1 to NT, MG, MH) |
| CBMS-xxx | Motor Brake Cable, Molded connector at motor end only, Custom Length - 1 ft increments (BRM-1 to NT, MG, MH) |
| CDRO-005 | Command Cable to Position Controller, 45° angle DB44M connector at drive, pigtails on controller end, 5 ft Length (EN, Epsilon, MDS to Position Controller, PLC) |
| CDRO-010 | Command Cable to Position Controller, 45° angle DB44M connector at drive, pigtails on controller end, 10 ft Length (EN, Epsilon, MDS to Position Controller, PLC) |
| CDRO-015 | Command Cable to Position Controller, 45° angle DB44M connector at drive, pigtails on controller end, 15 ft Length (EN, Epsilon, MDS to Position Controller, PLC) |
| CDRO-xxx | Command Cable to Position Controller, 45° angle DB44M connector at drive, pigtails on controller end, Custom Length - 1 ft increments (EN, Epsilon, MDS to Position Controller, PLC) |
| CFCF-005 | Molded Flex Motor Feedback Cable for mating w/ through wall bulkhead connector, 5ft Length (Use w/ all encoder feedback motors) |
| CFCF-015 | Molded Flex Motor Feedback Cable for mating w/ through wall bulkhead connector, 15ft Length (Use w/ all encoder feedback motors) |
| CFCF-025 | Molded Flex Motor Feedback Cable for mating w/ through wall bulkhead connector, 25ft Length (Use w/ all encoder feedback motors) |
| CFCF-xxx | Molded Flex Motor Feedback Cable for mating w/ through wall bulkhead connector, Non Standard Length (Use w/ all encoder feedback motors) |
| CFCO-005 | Motor Feedback Cable, IP65 Molded connector at drive only (use PTO6A-16-23SSR for motor feedback), 5 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCO-015 | Motor Feedback Cable, IP65 Molded connector at drive only (use PTO6A-16-23SSR for motor feedback), 15 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCO-025 | Motor Feedback Cable, connector at drive only (use PTO6A-16-23SSR for motor feedback), 25 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCO-050 | Motor Feedback Cable, connector at drive only (use PTO6A-16-23SSR for motor feedback), 50 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCO-100 | Motor Feedback Cable, connector at drive only (use PTO6A-16-23SSR for motor feedback), 100 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCO-xxx | Motor Feedback Cable, connector at drive only (use PTO6A-16-23SSR for motor feedback), Custom Length - 1 ft increments (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCS-005 | Motor Feedback Cable, IP65 Molded connector on both ends, 5 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCS-015 | Motor Feedback Cable, IP65 Molded connector on both ends, 15 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCS-025 | Motor Feedback Cable, IP65 Molded connector on both ends, 25 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCS-050 | Motor Feedback Cable, IP65 Molded connector on both ends, 50 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCS-100 | Motor Feedback Cable, IP65 Molded connector on both ends, 100 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFCS-xxx | Motor Feedback Cable, IP65 Molded connector at both ends, Custom Length - 1 ft increments (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23) |
| CFEF-005 | Molded Flex Motor Feedback Extension Cable for all encoder feedback motors with circular connectors at both ends, 5 ft Length |
| CFEF-015 | Molded Flex Motor Feedback Extension Cable for all encoder feedback motors w/circular connectors at both ends, 15 ft Length |
| CFEF-025 | Molded Flex Motor Feedback Extension Cable for all encoder feedback motors with circular connectors at both ends, 25 ft Length |
| CFEF-xxx | Molded Flex Motor Feedback Extension Cable for all encoder feedback motors with circular connectors at both ends, Custom Length - 1 ft increments |
| CFOCS-xxx | Motor Feedback Cable to be connected to bulkhead connector on one end and motor connector on the other end, Custom Length - 1 ft increments (PTB-16-23 to NT, MG, MH) |
| CFOS-005 | Motor Feedback Cable, IP65 Molded connector at motor only, 5 ft Length (DB26P-SS, DB26P-SA, PT06E-16-23PWS to NT, MG, MH) |
| CFOS-015 | Motor Feedback Cable, IP65 Molded connector at motor only, 15 ft Length (DB26P-SS, DB26P-SA, PT06E-16-23PWS to NT, MG, MH) |
| CFOS-025 | Motor Feedback Cable, IP65 Molded connector at motor only, 25 ft Length (DB26P-SS, DB26P-SA, PT06E-16-23PWS to NT, MG, MH) |
| CFOS-050 | Motor Feedback Cable, IP65 Molded connector at motor only, 50 ft Length (DB26P-SS, DB26P-SA, PT06E-16-23PWS to NT, MG, MH) |
| CFOS-100 | Motor Feedback Cable, IP65 Molded connector at motor only, 100 ft Length (DB26P-SS, DB26P-SA, PT06E-16-23PWS to NT, MG, MH) |
| CFOS-xxx | Motor Feedback Cable, IP65 Molded connector at motor only, Custom Length - 1 ft increments (DB26P-SS, DB26P-SA, PT06E-16-23PWS to NT, MG, MH) |
| CGS-038 | Cable grommet for through wall mounting, 0.25 - 0.375 ID (ENCO) |
| CGS-047 | Cable grommet for through wall mounting, 0.192 - 0.472 ID (ENCO, 4X16SS/SF, CMDS, CFOS, MGFS, CMDF) |
| CGS-063 | Cable grommet for through wall mounting, 0.50 - 0.625 ID (CFCF) |
| CGS-063 | Cable grommet for through wall mounting, 0.50 - 0.625 ID (CFCF) |
| CGS-063 | Cable grommet for through wall mounting, 0.50 - 0.625 ID (CFCF) |
| CGS-069 | Cable grommet for through wall mounting, 0.433 - 0.689 ID (4X12SS/SF, CMDO, CMDX, CDRO, CMMF, CFCF, CFOF-A, MGFF) |
| CGS-075 | Cable grommet for through wall mounting, 0.625 - 0.75 ID (CMMF) |
| CGS-075 | Cable grommet for through wall mounting, 0.625 - 0.75 ID (CMMF) |
| CGS-075 | Cable grommet for through wall mounting, 0.625 - 0.75 ID (CMMF) |
| CGS-098 | Cable grommet for through wall mounting, 0.630 - 0.984 ID (CMLS) |
| CGS-098 | Cable grommet for through wall mounting, 0.630 - 0.984 ID (CMLS) |
| CGS-098 | Cable grommet for through wall mounting, 0.630 - 0.984 ID (CMLS) |
| CHEETAH SM | Cheetah DC Thyristor, 1.5kW @ 220-240Vac single phase, 0.75kW @ 220-240Vac single phase, Open Chassis |
| CHEETAH SME | Cheetah DC Thyristor, 1.5kW @ 220-240Vac single phase, 0.75kW @ 220-240Vac single phase, Enclosed Chassis |
| CMDCF-xxx | Molded Flex Motor Power Cable, Connected to bulkhead on one end and motor connector on the other end, Custom Length - 1 ft increments, (PTB-16-8 to 2" & 3" NT, MG, MH Motors) |
| CMDCS-xxx | Motor Power Cable to be connected to bulkhead connector on one end and motor connector on the other end, Custom Length - 1 ft increments (PTB-16-8 to NT, MG, MH) |
| CMDEF-005 | Molded Flex Motor Power Extension Cable, Connectors at both ends, 5 ft Length (CMDS to 2" & 3" NT, MG, MH Motors) |
| CMDEF-015 | Molded Flex Motor Power Extension Cable, Connectors at both ends, 15 ft Length (CMDS to 2" & 3" NT, MG, MH Motors) |
| CMDEF-025 | Molded Flex Motor Power Extension Cable, Connectors at both ends, 25 ft Length (CMDS to 2" & 3" NT, MG, MH Motors) |
| CMDEF-xxx | Molded Flex Motor Power Extension Cable, Connectors at both ends, Custom Length - 1 ft increments (CMDS to 2" & 3" NT, MG, MH Motors) |
| CMDF-005 | Molded Flex Motor Power Cable, connector at motor end, Ferrules on drive end, 5 ft Length (EN, Epsilon, MDS to 2" & 3" NT, MG, MH Motors) |
| CMDF-015 | Molded Flex Motor Power Cable, connector at motor end, Ferrules on drive end, 15 ft Length (EN, Epsilon, MDS to 2" & 3" NT, MG, MH Motors) |
| CMDF-025 | Molded Flex Motor Power Cable, connector at motor end, Ferrules on drive end, 25 ft Length (EN, Epsilon, MDS to 2" & 3" NT, MG, MH Motors) |
| CMDF-xxx | Molded Flex Motor Power Cable, connector at motor end, Ferrules on drive end, Custom Length - 1 ft increments (EN, Epsilon, MDS to 2" & 3" NT, MG, MH Motors) |
| CMDO-005 | Command Cable to Position Controller, Straight DB44M connector at drive, pigtails on controller end, 5 ft Length (EN, Epsilon, MDS to Position Controller, PLC) |
| CMDO-015 | Command Cable to Position Controller, Straight DB44M connector at drive, pigtails on controller end, 15 ft Length (EN, Epsilon, MDS to Position Controller, PLC) |
| CMDO-A-xxx | Command Cable to Position Controller, Straight DB44M connector at drive, pigtails on controller end, Custom Length - 1 ft increments (EN, Epsilon, MDS to Position Controller, PLC) |
| CMDS-005 | Motor Power Cable, Molded connector on motor end, Ferrules on drive end, 5 ft Length (2&3" NT, MG & MH Motors) |
| CMDS-015 | Motor Power Cable, Molded connector on motor end, Ferrules on drive end, 15 ft Length (2&3" NT, MG & MH Motors) |
| CMDS-025 | Motor Power Cable, Molded connector on motor end, Ferrules on drive end, 25 ft Length (2&3" NT, MG & MH Motors) |
| CMDS-050 | Motor Power Cable, Molded connector on motor end, Ferrules on drive end, 50 ft Length (2&3" NT, MG & MH Motors) |
| CMDS-100 | Motor Power Cable, Molded connector on motor end, Ferrules on drive end, 100 ft Length (2&3" NT, MG & MH Motors) |
| CMDS-xxx | Motor Power Cable, Molded connector on motor end, Ferrules on drive end, Custom Length - 1 ft increments (2&3" NT, MG & MH Motors) |
| CMDX-003 | Command Cable, Straight DB44M connectors on both ends, 3 ft Length (En, Epsilon, MDS to ECI-44) |
| CMDX-005 | Command Cable, Straight DB44M connectors on both ends, 5 ft Length (En, Epsilon, MDS to ECI-44) |
| CMDX-015 | Command Cable, Straight DB44M connectors on both ends, 15 ft Length (En, Epsilon, MDS to ECI-44) |
| CMDX-A-xxx | Command Cable, Straight DB44M connectors on both ends, Custom Length - 1 ft increments (En, Epsilon, MDS to ECI-44) |
| CMLF-005 | Molded Flex Duty Motor Power Cable for 8" motors, Connector at motor end and flying leads on other end, 5 ft Length (EN, Epsilon, MDS to NT, MG, MH) |
| CMLF-015 | Molded Flex Duty Motor Power Cable for 8" motors, Connector at motor end and flying leads on other end, 15 ft Length (EN, Epsilon, MDS to NT, MG, MH) |
| CMLF-025 | Molded Flex Duty Motor Power Cable for 8" motors, Connector at motor end and flying leads on other end, 25 ft Length (EN, Epsilon, MDS to NT, MG, MH) |
| CMLF-xxx | Flex Duty Motor Power Cable for 8" motors, Connector at motor end and flying leads on other end, Custom Length - 1 ft increments (EN, Epsilon, MDS to NT, MG, MH) |
| CMLS-005 | Motor Power Cable for 8" motors, Molded connector @ motor end, Ferrules on drive end, 5 ft Length (MDS to MH motors) |
| CMLS-015 | Motor Power Cable for 8" motors, Molded connector @ motor end, Ferrules on drive end, 15 ft Length (MDS to MH motors) |
| CMLS-025 | Motor Power Cable for 8" motors, Molded connector @ motor end, Ferrules on drive end, 25 ft Length (MDS to MH motors) |
| CMLS-050 | Motor Power Cable for 8" motors, Molded connector @ motor end, Ferrules on drive end, 50 ft Length (MDS to MH motors) |
| CMLS-xxx | Motor Power Cable for 8" motors, Molded connector @ motor end, Ferrules on drive end, Custom Length - 1 ft increments (MDS to MH motors) |
| CMMEF-005 | Molded Flex Motor Power Extension Cable for 4" & 6" motors, Connectors at both ends, 5 ft Length (CMMS to to MG, MH) |
| CMMEF-015 | Molded Flex Motor Power Extension Cable for 4" & 6" motors, Connectors at both ends, 15 ft Length (CMMS to to MG, MH) |
| CMMEF-025 | Molded Flex Motor Power Extension Cable for 4" & 6" motors, Connectors at both ends, 25 ft Length (CMMS to to MG, MH) |
| CMMEF-xxx | Molded Flex Motor Power Extension Cable for 4" & 6" motors, Connectors at both ends, Custom Length - 1 ft increments (CMMS to to MG, MH) |
| CMMF-005 | Molded Flex Duty Motor Power Cable for 4" & 6" motors, Connector at motor end and flying leads on other end, 5 ft Length (EN, Epsilon, MDS to NT, MG, MH) |
| CMMF-015 | Molded Flex Duty Motor Power Cable for 4" & 6" motors, Connector at motor end and flying leads on other end, 15 ft Length (EN, Epsilon, MDS to NT, MG, MH) |
| CMMF-025 | Molded Flex Duty Motor Power Cable for 4" & 6" motors, Connector at motor end and flying leads on other end, 25 ft Length (EN, Epsilon, MDS to NT, MG, MH) |
| CMMF-xxx | Flex Duty Motor Power Cable for 4" & 6" motors, Connector at motor end and flying leads on other end, Custom Length - 1 ft increments (EN, Epsilon, MDS to NT, MG, MH) |
| CMMS-005 | Motor Power Cable for 4" & 6" motors, Molded connector @ motor end, Ferrules on drive end, 5 ft Length (EN, MDS to MG, MH) |
| CMMS-015 | Motor Power Cable for 4" & 6" motors, Molded connector @ motor end, Ferrules on drive end, 15 ft Length (EN, MDS to MG, MH) |
| CMMS-025 | Motor Power Cable for 4" & 6" motors, Molded connector @ motor end, Ferrules on drive end, 25 ft Length (EN, MDS to MG, MH) |
| CMMS-050 | Motor Power Cable for 4" & 6" motors, Molded connector @ motor end, Ferrules on drive end, 50 ft Length (EN, MDS to MG, MH) |
| CMMS-100 | Motor Power Cable for 4" & 6" motors, Molded connector @ motor end, Ferrules on drive end, 100 ft Length (EN, MDS to MG, MH) |
| CMMS-xxx | Motor Power Cable for 4" & 6" motors, Molded connector @ motor end, Ferrules on drive end, Custom Length - 1 ft increments (EN, MDS to MG, MH) |
| CO485-010 | RS485 Serial Interface Cable, DB9-P on drive end, flying leads on computer end, 10 ft Length (EN, Epsilon, MDS to PC, HMI, PLC {Modbus Master}) |
| CO485-025 | RS485 Serial Interface Cable, DB9-P on drive end, flying leads on computer end, 25 ft Length (EN, Epsilon, MDS to PC, HMI, PLC {Modbus Master}) |
| CO485-050 | RS485 Serial Interface Cable, DB9-P on drive end, flying leads on computer end, 50 ft Length (EN, Epsilon, MDS to PC, HMI, PLC {Modbus Master}) |
| CT BROWSER | Maintenance software tool for CTNet and RS485 based networks. Includes real-time oscilloscope, transient recorder and Multi-Drive parameter storage and retrieval system |
| CT COMMS CABLE | RS-232/485 drive programming cable for use with Commander SE, SX, SK and Unidrive SP |
| CT COMMS CABLE | RS-232/485 drive programming cable for use with Commander SE, SX, SK and Unidrive SP |
| CT COMMS CABLE | RS-232/485 drive programming cable for use with Commander SE, SX, SK and Unidrive SP |
| CT COMMS CABLE | RS-232/485 drive programming cable for use with Commander SE, SX, SK and Unidrive SP |
| CT COMMS CABLE | RS-232/485 drive programming cable for use with Commander SE, SX, SK and Unidrive SP |
| CTD-MDP-485-005 | RS485 Cable, DB9M Connector on one end (Unidrive, Mentor II, Quantum III), Dressed leads on one end (DB9F-Term), 5 ft Length |
| CTD-MDP-485-005 | RS485 Cable, DB9M Connector on one end (Unidrive, Mentor II, Quantum III), Dressed leads on one end (DB9F-Term), 5 ft Length |
| CTD-MDP-485-010 | RS485 Cable, DB9M Connector on one end (Unidrive, Mentor II, Quantum III), Dressed leads on one end (DB9F-Term), 10 ft Length |
| CTD-MDP-485-010 | RS485 Cable, DB9M Connector on one end (Unidrive, Mentor II, Quantum III), Dressed leads on one end (DB9F-Term), 10 ft Length |
| CTD-MDP-485-015 | RS485 Cable, DB9M Connector on one end (Unidrive, Mentor II, Quantum III), Dressed leads on one end (DB9F-Term), 15 ft Length |
| CTD-MDP-485-015 | RS485 Cable, DB9M Connector on one end (Unidrive, Mentor II, Quantum III), Dressed leads on one end (DB9F-Term), 15 ft Length |
| CTD-MDP-485-xxx | RS485 Cable, DB9M Connector on one end (Unidrive, Mentor II, Quantum III), Dressed leads on one end (DB9F-Term), Custom Length - 1 ft increments (max 250 ft) |
| CTD-MDP-485-xxx | RS485 Cable, DB9M Connector on one end (Unidrive, Mentor II, Quantum III), Dressed leads on one end (DB9F-Term), Custom Length - 1 ft increments (max 250 ft) |
| CTD-PC-232-010 | 10' cable from the Unidrive RS232 port to PC |
| CTD-PC-232-010 | 10' cable from the Unidrive RS232 port to PC |
| CTD-PC-485-010 | 10' Cable from the Unidrive RS485 port to PC |
| CTD-PC-485-010 | 10' Cable from the Unidrive RS485 port to PC |
| CTD-PC-485-010 | 10' Cable from the Unidrive RS485 port to PC |
| CTD-PCM-485-005 | RS485 Cable, DB9F Connector on PC end (DB9F-42-DB9M), Dressed leads on drive end (DB9F-Term), 5 ft Length |
| CTD-PCM-485-005 | RS485 Cable, DB9F Connector on PC end (DB9F-42-DB9M), Dressed leads on drive end (DB9F-Term), 5 ft Length |
| CTD-PCM-485-010 | RS485 Cable, DB9F Connector on PC end (DB9F-42-DB9M), Dressed leads on drive end (DB9F-Term), 10 ft Length |
| CTD-PCM-485-010 | RS485 Cable, DB9F Connector on PC end (DB9F-42-DB9M), Dressed leads on drive end (DB9F-Term), 10 ft Length |
| CTD-PCM-485-015 | RS485 Cable, DB9F Connector on PC end (DB9F-42-DB9M), Dressed leads on drive end (DB9F-Term), 15 ft Length |
| CTD-PCM-485-015 | RS485 Cable, DB9F Connector on PC end (DB9F-42-DB9M), Dressed leads on drive end (DB9F-Term), 15 ft Length |
| CTD-PCM-485-xxx | RS485 Cable, DB9F Connector on PC end (DB9F-42-DB9M), Dressed leads on drive end (DB9F-Term), Custom Length - 1 ft increments (max 250 ft) |
| CTD-PCM-485-xxx | RS485 Cable, DB9F Connector on PC end (DB9F-42-DB9M), Dressed leads on drive end (DB9F-Term), Custom Length - 1 ft increments (max 250 ft) |
| CTD-RJM-485-005 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 5 ft Length |
| CTD-RJM-485-005 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 5 ft Length |
| CTD-RJM-485-005 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 5 ft Length |
| CTD-RJM-485-005 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 5 ft Length |
| CTD-RJM-485-010 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 10 ft Length |
| CTD-RJM-485-010 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 10 ft Length |
| CTD-RJM-485-010 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 10 ft Length |
| CTD-RJM-485-010 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 10 ft Length |
| CTD-RJM-485-015 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 15 ft Length |
| CTD-RJM-485-015 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 15 ft Length |
| CTD-RJM-485-015 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 15 ft Length |
| CTD-RJM-485-015 | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), 15 ft Length |
| CTD-RJM-485-xxx | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), Custom Length - 1 ft increments (max 250 ft) |
| CTD-RJM-485-xxx | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), Custom Length - 1 ft increments (max 250 ft) |
| CTD-RJM-485-xxx | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), Custom Length - 1 ft increments (max 250 ft) |
| CTD-RJM-485-xxx | RS485 Cable, RJ45 Connector on one end (Unidrive SP, Commander SE), Dressed leads on one end (DB9F-Term), Custom Length - 1 ft increments (max 250 ft) |
| CTIU-100 | 8 line, 20 character adjustable back-lit display with 4 function keys. Separate RS-232/485 ports. |
| CTIU-110 | 8 line, 20 character adjustable back-lit display with 16 function/numeric keypad. Separate RS-232/485 ports. |
| CTIU-200 | 8 line, 20 character adjustable back-lit display with 37 function/numeric keypad. Separate RS-232/485 ports. full graphics & animations. Std CAN conn & exp port for I/O and CTNet. |
| CTIU200-CTNET-REVC | CTNet interface option for CTIU-200 (Current CTNet version only) |
| CTIU-50 | 2 line, 20 character adjustable back-lit display with 14 key function/numeric keypad. Separate RS-232/485 ports. |
| CTIU-CTD-232-005 | RS232 Cable, Connector on drive end, Dressed wires on CTIU end, 5 ft Length |
| CTIU-CTD-232-010 | RS232 Cable, Connector on drive end, Dressed wires on CTIU end, 10 ft Length |
| CTIU-CTD-485-005 | RS485 Cable, Connector on drive end, Dressed wires on CTIU end, 5 ft Length |
| CTIU-CTD-485-010 | RS485 Cable, Connector on drive end, Dressed wires on CTIU end, 10 ft Length |
| CTIU-CTD-485-015 | RS485 Cable, Connector on drive end, Dressed wires on CTIU end, 15 ft Length |
| CTIU-CTD-485-025 | RS485 Cable, Connector on drive end, Dressed wires on CTIU end, 25 ft Length |
| CTIU-CTD-485-xxx | RS485 Cable, Connector on drive end, Dressed wires on CTIU end, Custom Length - 1 ft increments (max 250 ft) |
| CTIU-MDP-485-005 | RS485 Cable, Dressed leads on both ends, 5 ft Length |
| CTIU-MDP-485-010 | RS485 Cable, Dressed leads on both ends, 10 ft Length |
| CTIU-MDP-485-015 | RS485 Cable, Dressed leads on both ends, 15 ft Length |
| CTIU-MDP-485-xxx | RS485 Cable, Dressed leads on both ends, Custom Length - 1 ft increments (max 250 ft) |
| CTIU-PC-232-005 | RS232 Programming Cable, Connectors on both ends, 5 Ft Length |
| CTIU-SE-485-005 | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTIU end, 5 ft Length |
| CTIU-SE-485-010 | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTIU end, 10 ft Length |
| CTIU-SE-485-015 | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTIU end, 15 ft Length |
| CTIU-SE-485-025 | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTIU end, 25 ft Length |
| CTIU-SE-485-xxx | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTIU end, Custom Length - 1 ft increments (max 250 ft) |
| CTIUSOFT | Windows based programming software for use with CTIUs. |
| CTIU-SP-485-005 | RS485 Cable, RJ45 Connector on Unidrive SP end, Dressed leads on CTIU end, 5 ft Length |
| CTIU-SP-485-010 | RS485 Cable, RJ45 Connector on Unidrive SP end, Dressed leads on CTIU end, 10 ft Length |
| CTIU-SP-485-015 | RS485 Cable, RJ45 Connector on Unidrive SP end, Dressed leads on CTIU end, 15 ft Length |
| CTIU-SP-485-025 | RS485 Cable, RJ45 Connector on Unidrive SP end, Dressed leads on CTIU end, 25 ft Length |
| CTIU-SP-485-xxx | RS485 Cable, RJ45 Connector on Unidrive SP end, Dressed leads on CTIU end, Custom Length - 1 ft increments (max 250 ft) |
| CTIU-UG | CTIU Operator Interface User Guide |
| CTKP | Universal Keypad, 2-line, 16 character green back-lit LCD, 2/4 wire RS-485 comms., multi-drop connectivity. |
| CTKP-CTD-485-005 | RS485 Cable, Connector on drive end, Dressed wires on CTKP end, 5 ft Length |
| CTKP-CTD-485-010 | RS485 Cable, Connector on drive end, Dressed wires on CTKP end, 10 ft Length |
| CTKP-CTD-485-015 | RS485 Cable, Connector on drive end, Dressed wires on CTKP end, 15 ft Length |
| CTKP-CTD-485-025 | RS485 Cable, Connector on drive end, Dressed wires on CTKP end, 25 ft Length |
| CTKP-CTD-485-xxx | RS485 Cable, Connector on drive end, Dressed wires on CTKP end, Custom Length - 1 ft increments (max 250 ft) |
| CTKP-MDP-485-005 | RS485 Cable, Connector on CTKP end, Dressed leads on drive end, 5 ft Length |
| CTKP-MDP-485-010 | RS485 Cable, Connector on CTKP end, Dressed leads on drive end, 10 ft Length |
| CTKP-MDP-485-015 | RS485 Cable, Connector on CTKP end, Dressed leads on drive end, 15 ft Length |
| CTKP-MDP-485-xxx | RS485 Cable, Connector on CTKP end, Dressed leads on drive end, Custom Length - 1 ft increments (max 250 ft) |
| CTKP-SE-485-005 | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTKP end, 5 ft Length |
| CTKP-SE-485-010 | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTKP end, 10 ft Length |
| CTKP-SE-485-015 | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTKP end, 15 ft Length |
| CTKP-SE-485-025 | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTKP end, 25 ft Length |
| CTKP-SE-485-xxx | RS485 Cable, RJ45 Connector on Commander SE end, Dressed leads on CTKP end, Custom Length - 1 ft increments (max 250 ft) |
| CTKP-UG | CTKP Operator Interface User Guide |
| CT-MC-POWER-CD | Shipped with every MC Controller. Contains Motion Perfect and other software tools to configure MC Controllers (MC-202, MC-206 and MC-224) |
| CT-MME-POWER-CD | Shipped with every Epsilon, E & MDS Series Drive & SM-EZMotion & FM Series Module. Contains Software to configure these products plus FX and Axima Products |
| CTNET API | CTNet software driver for Windows DLL |
| CTNET OPC | CTNet software driver for Microsoft OPC |
| CTNET-100 | CTNet Bulk Cable, 100 meters Length |
| CTNET-200 | CTNet Bulk Cable, 200 meters Length |
| CTNET-FIB-REVD | Twisted-pair to fiber optic repeater for CTNet cable requirements greater than 200 meters |
| CTNET-HUB-REVD | CTNet 3 Port Hub, Provides connectivity up to 3 CTNet segments (Current CTNet version only) |
| CTNET-HYBRID HUB | CTNet 3 Port Hub, Provides connectivity for 1 segment of CTNet (Current Version) and 2 segments of CTNet (Previous Versions) |
| CTNET-ISA-5 | CTNet Network interface card for desktop |
| CTNET-ISA-REVD | CTNet Network Interface Card with ISA Bus for Desktop PC's (Current CTNet version only) |
| CTNET-MAU-REVA | Medium Access Unit for use with CTNet-PCMCIA-RevD Network Interface Card (Previous CTNet version only) |
| CTNET-MAU-REVD | Medium Access Unit for PCMCIA Network Interface Card (Current CTNet version only) |
| CTNET-PCI | CTNet Network interface card for desktop w/PCI bus |
| CTNET-PCI-REVD | CTNet Network Interface Card with PCI Bus for Desktop PC's (Current CTNet version only) |
| CTNET-PCMCIA-5 | CTNet Network Interface Card for Laptop PC's, includes Medium Access Unit (MAU) |
| CTNET-PCMCIA-REVD | CTNet Network Interface PCMCIA Card for Laptop PC's, includes Medium Access Unit (MAU) |
| CTNet-UG | CT Net User Guide |
| CTNET-xxx | CTNet Bulk Cable, Custom Length - 1 foot increments (max 650 Feet) ** Unit of measure is now in feet** |
| CTSOFT | Windows based Drive Configuration Tool for Unidrive, Unidrive SP and Commander SK |
| CTSOFT | Windows based Drive Configuration Tool for Unidrive, Unidrive SP and Commander SK |
| CTSOFT | Windows based Drive Configuration Tool for Unidrive, Unidrive SP and Commander SK |
| D9P-D9P | Adapter, 9-pin male to 9-pin male (OIT-PC-232-XXX Cables) |
| DB140 | Digitax, 1.4kW, 460V - 3Ø, 2.8A Output Current, Nema 1 |
| DB1500 | No Longer available -- Digitax, 15kW, 460V - 3Ø, 32A Output Current, Nema 1 |
| DB220 | Digitax 2.2kW, 460V - 3Ø, 4.4A Output Current, Nema 1 |
| DB2200 | No Longer available -- Digitax, 22kW, 460V - 3Ø, 48A Output Current, Nema 1 |
| DB26P-SA | DB26M connector for feedback cable, 45° angle cable outlet, metallized back shell |
| DB26P-SS | DB26M connector for feedback cable, straight cable outlet, metallized plastic back shell |
| DB420 | Digitax, 4.2kW, 460V - 3Ø, 8.5A Output Current, Nema 1 |
| DB44P-SA | DB44M connector for command cable, 45° angle cable outlet, metallized plastic back shell |
| DB600 | Digitax, 6kW, 460V - 3Ø, 13A Output Current, Nema 1 |
| DB750 | Digitax, 7.5kW, 460V - 3Ø, 16A Output Current, Nema 1 |
| DB9F-42-DB9M | RS232/485 adaptor: DB9-P female connector on RS485 end, DB9-P male connector on RS232 end. |
| DB9F-42-DB9M | RS232/485 adaptor: DB9-P female connector on RS485 end, DB9-P male connector on RS232 end. |
| DB9F-TERM | RS485 network connector: DB9-P female connector on UD7X end, terminal strip on cable end. |
| DB9F-TERM | RS485 network connector: DB9-P female connector on UD7X end, terminal strip on cable end. |
| DB9M-2I-DB9F | RS232 Optical Isolator **For Desktop or Laptop use** |
| DB9M-2I-DB9F | RS232 Optical Isolator **For Desktop or Laptop use** |
| DB9M-2I-DB9F | RS232 Optical Isolator **For Desktop or Laptop use** |
| DB9M-2I-DB9F | RS232 Optical Isolator **For Desktop or Laptop use** |
| DB9M-2I-DB9F | RS232 Optical Isolator **For Desktop or Laptop use** |
| DB9M-2I-DB9F | RS232 Optical Isolator **For Desktop or Laptop use** |
| DB9M-2I-DB9F-D | RS232 Optical Isolator **For Desktop PC use only** |
| DB9M-2I-DB9F-D | RS232 Optical Isolator **For Desktop PC use only** |
| DB9M-2I-DB9F-D | RS232 Optical Isolator **For Desktop PC use only** |
| DB9M-2I-DB9F-D | RS232 Optical Isolator **For Desktop PC use only** |
| DB9M-2I-DB9F-D | RS232 Optical Isolator **For Desktop PC use only** |
| DB9M-2I-DB9F-D | RS232 Optical Isolator **For Desktop PC use only** |
| DB9P-SA | DB9M connector for serial cable, 45° angle cable outlet, metalized plastic back shell |
| DB9P-SS | DB9M connector for serial cable, straight cable outlet, metalized plastic back shell |
Home / Contact Us / Products / Service / Sales /Supported Product / Powertec Support / Serviced Products / Feedback
Microcon Technologies Inc.
1105 Crestlawn Drive, Unit # D8 & D9
Mississauga, Ontario L4W 1A7 Canada
Tel: (905) 602-4770
Fax: (905) 602-4779
e-mail: [email protected]
Website: www.microcontechnologies.com
|
|
