Webpro Advanced Digital Web Tension Controller for Cleveland Motions Controls

WebPro Advanced Digital Web Tension Controller

The CMC® Cleveland-Kidder® WebPro Advanced Digital Web Tension Controller provides closed-loop control with tension transducer (load cell) feedback for a wide range of web tension applications. It can be easily configured for unwind brakes (pneumatic or electric), the unwind motor, intermediate tension requirements (between motor driven nips), the surface winder, the clutch winder, and the center winder with taper tension. It utilizes a 32-bit microprocessor and displays measured tension values in digital and analog simultaneously. The WebPro Advanced Digital Tension Controller is available for either new machinery or as a retrofit.

Features

Closed-Loop Tension Control Configurable for either Brakes, Clutches, or Drives
Easily Configurable for Unwind, Intermediate, and Winder Applications
Large, Bright, Easy-to-Read Display; Displays Digital and Analog Tension Values; Total, Left and Right, Tension Displayed Together
Tension Can Be Displayed in Pounds, Newtons, Kilograms, or Percentages

PART NUMBER	DESCRIPTION	APPLICATION
MWP-12662-0	WebPro Unwind Tension Controller-Brake Type	Controls tension by way of brake on Center Unwind
MWP-12662-1	WebPro Unwind Tension Controller-Speed/Torque	Controls Tension by way of drives and motors on Center Unwind
MWP-12663	WebPro Intermediate Tension Controller	Controls tension via drives and motors on Intermediate Section
MWP-12664	WebPro Winder Tension Controller	Controls tension on Center or Surface Winders via drives and motors or clutch.
WebPro Accessories
X44-31399	I/P (Current/Pressure) Electro-pneumatic Transducers	For use with WebPro Unwind Tension Controller - Brake Type Accepts WebPro 4 -20 ma input and provides 0 - 120 psig output to brake.
X01-24219	Air Filter for use with I/P Transducer recommended but not required if customer provides filtered air.	Removes dirt and liquid in air line ahead of the I/P transducer

WebPro Controller mounted and wired along with stated accessory items in a Nema 4/12 enclosure.

PART NUMBER	DESCRIPTION
MWP-13511	WebPro Intermediate Tension Controller (MWP-12663) with Enclosure.
MWP-13512	WebPro Unwind Tension Controller - Brake Type (MWP-12662-0) with I/P (Current/Pressure) Electromagnetic Transducer mounted and wired in an Enclosure.
MWP-13514	WebPro Unwind Tension Controller - Brake Type (MWP-12662-0) with 24 VDC Magnetic Particle Brake Current Regulator mounted and wired in an enclosure.