Digitax ST-I (Indexer)

Features

The Indexer model is designed for simple standalone positioning applications using an onboard position controller.

Programming is achieved using a flexible IEC61131-3 software environment including PLCOpen Function Blocks, Fieldbus, Ethernet and I/O enable connectivity to other automation components.

Applications include: Indexing tables, fast conveyor positioning, cut-to-length machines, punching.

Specifications

	DIGITAX ST-B	DIGITAX ST-I	DIGITAX ST-P	DIGITAX ST-Z
Two option module slots		√	√	√
Digital and analogue I/O with pluggable connector	√	√	√	√
Smartcard parameter copying device	√	√	√	√
High speed Freeze input for position capture	√	√	√	√
Safe Torque Off (Secure Disable)	√	√	√	√
CTSoft commissioning software	√	√	√
CTScope oscilloscope software	√	√	√
Removable keypad (optional)	√	√	√	√
RS485 PC programming port	√	√	√	√
Intellectual Property Protection		√	√
Index motion programming within CTSoft*		√	*
compatible programming** ^TMRSLogix
Program multi-tasking			√	√
PowerTools Pro programming environment				√
SyPT Pro programming environment with PLCopen programming		√	√
Drive-to-drive networking	√

* Able to import Index Motion into SYPTPro
** Using Control Techniques’ FREE AOI files available in the Downloads section

Available motor / drive combinations

servo drive / motor combination

NB: The selection of Drive-Motor combinations should be based on Duty/load Profiles of the application

FUNCTION	QTY	I/O DEFAULT FUNCTION	RATING
Analogueue input 1	1	Frequency /speed ref 1	± 10V
Analogueue input 1	1	Frequency /speed ref 1
Analog input 2	1	Frequency /speed ref 2	± 10V(default), 0-20mA or 4-20mA
Analogue input 3	1	Motor thermistor	± 10V, 0-20mA, 4-20mA or Motor thermistor input (default)
Analogue output	2	Speed/frequency Torque (active current)	± 10V(default), 0-20mA or 4-20mA
Digital input	3	Run reverse input Analogue input 1/2 select Jog forward input	+24V
Digital input / output	3	At zero speed output Reset input Run forward input	+24V
Relay	1	Drive OK indicator	Normally open
Drive enable (Safe Torque Off)	1	Safe Torque Off input	+24V
+24V External input	1	External 24V supply	+24V

Drive dimensions

digitax st servo drive dimensions

DRIVE MODEL RATINGS
MODEL	(V) RATED VOLTAGE	NO. OF INPUT PHASES	(ARMS) NOMINAL CURRENT	PEAK CURRENT (ARMS)
DST1201	230	1	1.1	2.2
DST1202	230	1	2.4	4.8
DST1203	230	1	2.9	5.8
DST1204	230	1	4.7	9.4
DST1201	230	3	1.7	5.1
DST1202	230	3	3.8	11.4
DST1203	230	3	5.4	16.2
DST1204	230	3	7.6	22.8
DST1401	400	3	1.5	4.5
DST1402	400	3	2.7	8.1
DST1403	400	3	4.0	12.0
DST1404	400	3	5.9	17.7
DST1405	400	3	8.0	24.0

Note: The drive selection should be based on the duty/load profile of the application

SUPPLY REQUIREMENTS
MODEL	SUPPLY VOLTAGE	SUPPLY FREQUENCY RANGE
DST120X	200V to 240V +/-10% single phase	48Hz to 65Hz
DST120X	200V to 240V +/-10% three phase	48Hz to 65Hz
DST140X	380V to 480V +/-10% three phase	48Hz to 65Hz

GENERAL DRIVE DATA
TYPE	DETAILS
IP rating	1P20 (UL Type 1 / NEMA 1)
Weight (net)	2.1kg (4.6 lb) Excluding keypad and option modules
Ambient operating temperature	0˚C to 50˚C (32˚F to 122˚F) Output current is derated at ambient temperatures >40˚C (104˚F)
Operating humidity	Maximum relative humidity 95% non-condensing
Altitude	0m to 3000m (9900ft). Derate the maximum output current for the specified figure by 1% per 100m (330 ft) above 1000m (3300 ft).
Power cycles per hour	60 starts per hour equally spaced
Digital and analogue I/O	3 dedicated digital inputs 1 Freeze input (1µs) 1 Standard analogue input (10 bit + sign) 2 Analogue outputs 1 High resolution analogue input (16 bit +sign) 1 Relay output 3 bi-directional digital input/outputs1 Freeze input (1µs)
Vibration	Tested in accordance to IEC60068-2-6/64
Mechanical shock	Tested in accordance to IEC60068-2-29
Electromagnetic immunity	Complies with EN61800-3 (2nd Environment)
Electromagnetic emissions	EN61000-6-3 and EN61000-6-4 with optional footprint EMC filter Complies with EN61800-3 (2nd Environment) with onboard filter.
Safe Torque Off	Category 3 EN 954-1:1997 PLe EN ISO 13848-1:2006 SIL 3 EN 61800-5-2:2007 Approved by BGIA as meeting the requirements of the following standards for the prevention of unexpected starting of the drive

Options

Keypads and parameter storage

Digitax ST Keypad

Digitax ST Keypad is a compact high brightness LED keypad for all Digitax ST drives

Smartcard

A memory device that can be used to back-up parameter sets and PLC programs, and copy them from one drive to another

Automation and Motion option modules

	SM-Applications Plus SM-Applications Plus offers high performance programmable logic and motion control together with high speed I/O and CTNet, a high speed Fieldbus
	SM-Applications Lite V2 User programmable logic and motion control module for standalone drive applications or for when the drive is connected to a centralized controller via I/O or Fieldbus
	SM-Register A flexible, high performance solution for programmable motion requiring high speed registration features
	SM-EZMotion This module and Power Tools Pro software provide a user friendly environment for motion programming

Communication option modules

	SM-CAN User programmable CAN option module, allows the development of CAN protocols
	SM-CANopen CANopen interface supports various profiles including several drive profiles
	SM-DeviceNet SM-DeviceNET option module
	SM-EtherCAT Slave/follower option module, for high performance servo applications
	SM-Ethernet supports Ethernet/IP and Modbus TCP/IP and can generate emails. Provides high speed drive access, global connectivity and integration with IT network technologies
	SM-Interbus Interbus interface option module
	SM-LON LonWorks interface for building automation applications
	SM-PROFIBUS-DP Slave/follower option module
	SM-PROFINET PROFINET is an Ethernet based industrial network protocol adapting Ethernet hardware and protocols
	SM-SERCOS SERCOS interface Option Module

Input and Output Option Modules

	CTNet IO Flexible I/O system for remote connectivity with Control Techniques’ SM-Applications Plus and SM-Register option modules
	SM IO 24V Protected Overvoltage protected I/O module
	SM-IO 120V Module that provides digital I/O rated to 120Vac
	SM-IO 32 Extended digital I/O, adding 32 digital high speed bi-directional I/O points to the drive
	SM-IO Lite Extended I/O interface with reduced functionality
	SM-IO PELV NAMUR standard I/O interface with high speed I/O
	SM-IO Plus Extended I/O interface to increase the number of I/O points on a drive
	SM-IO Timer Extended I/O option module with real time clock

Feedback Option Modules

	SM-Encoder Output Plus Incremental encoder input and output option module that enables connection with external motion controllers
	SM-Encoder Plus Incremental encoder input option module
	SM-Resolver Resolver module is designed for robust feedback in demanding environments
	SM-Universal Encoder Plus Additional combined encoder input and output interface supporting Incremental, SinCos, HIPERFACE, EnDAT and SSI encoders

Drive Interface Units - Communications

Operator Interfaces and HMI

The powerful CTVue HMI (Human Machine Interface) line and integrated drivers for Control Techniques drives make it easy to integrate HMI with CT drives

Software

Commissioning and monitoring software

CTSoft - Drive configuration tool for Control Techniques drives

CTSoft is a drive configuration tool for commissioning, optimizing and monitoring Control Techniques drives

CTScope - Real-time software oscilloscope

CTScope is a real-time full featured software oscilloscope for viewing and analyzing changing values within the drive

Automation and motion programming software

SyPTLite - Fast user program editor for Control Techniques drives

SYPTLite is a ladder diagram editor allowing users to develop simple programs for Control Techniques drives and option modules

PowerTools Pro - Advanced motion control programming

Advanced motion control programming for Unidrive SP (with the SM-EZMotion module) and Digitax ST-Z drives and Epsilon EP, FM-3E and FM-4E modules

Connectivity Software

CTOPCServer - OPC compliant server

CTOPCServer is an OPC compliant server for interfacing your own PC software with Control Techniques

HMI Software

CTVue HMI Software

Control Techniques CTVue human interface software tool enables the operator to easily configure drive-related control variables.

Available motor / drive combinations

Drive dimensions

Keypads and parameter storage

Digitax ST Keypad

Smartcard

Automation and Motion option modules

SM-Applications Plus

SM-Applications Lite V2

SM-Register

SM-EZMotion

Communication option modules

SM-CAN

SM-CANopen

SM-DeviceNet

SM-EtherCAT

SM-Ethernet

SM-Interbus

SM-LON

SM-PROFIBUS-DP

SM-PROFINET

SM-SERCOS

Input and Output Option Modules

CTNet IO

SM IO 24V Protected

SM-IO 120V

SM-IO 32

SM-IO Lite

SM-IO PELV

SM-IO Plus

SM-IO Timer